The EV driver can control the charging activity of their EV Chaging Point using their mobile phone or any other web enabled device, allowing them to monitor/record all their charging activity, data and history. Available with a Type 2, Mode 3 charging socket or tethered cable leads offering 3.6kw, 7.2kw, 11kw, 22kw charging speed.
Competitive Benefits
OZEV approved
Default Off -peak charging included
Anti-tamper included
Home load balance monitoring
Welded contacts detection
Built in independent MID meter
PEN Fault protection
Random delay monitoring included
Auto Test
Solar power/Battery monitoring available
RS485 Adaptor wired to CT
Home-use available for Commercial use
Working TNCS and TT system
Demand Side Respond Service included
Total power monitoring
Wifi & Ethernet & Blue tooth connectivity
3x RFID cards + App monitoring as standard
Reset Button
Physical Specifications
| Housing case |
Plastic |
| Mounting Location |
Outdoor /Indoor (permanent mounting) |
| Charging Model |
Model 3(IEC61851-1) |
| Charging Interface Type |
IEC62196-2 Type 2 socket, Tethered optional |
| Charging current |
16A-32A |
| Display |
RGB Led indicator as standard |
| Operation |
App monitoring +RFID cards as standard |
| IP Grade |
IP65 |
| Operation Temperature |
-30°C ~ +55°C |
| Operation Humidity |
5% ~ 95% without condensation |
| Operation Attitude |
<2000m |
| Cooling method |
Natural air cooling |
| Enclosure Dimensions |
390x230x130mm |
| Weight |
7KG |
Electrical Specifications
| Input Voltage |
230Vac/380Vac±10% |
| Input Frequency |
50Hz |
| Output Power |
3.6/7.2KW, 11/22KW |
| Output Voltage |
230/380Vac |
| Output Current |
16-32A |
| Standby power consumption |
3w |
| Earth leakage protection (Type A+6mA DC) |
√ |
| 2ed Type A rcmu on PE wire |
√ |
| PEN protection as standard |
√ |
| No earth rod required as standard |
√ |
| Independent AC Contactors |
√ |
| Independent MID meter as standard |
√ |
| Solenoid locking mechanism |
√ |
| Emergency Stop Button |
√ |
| Main circuit CT for load balance |
√ |
| Solar circuit CT |
Optional |
| Battery circuit CT |
Optional |
Security Specifications
| No earth rod required |
√ |
| PEN/PME fault protection |
√ |
| Welded contacts detection |
√ |
| Over-voltage Protection |
√ |
| Under-voltage protection |
√ |
| Overload protection |
√ |
| Over current protection |
√ |
| Short Circuit protection |
√ |
| Earth leakage protection A+6mADC |
√ |
| Type A rcmu on PE wire (new version) |
√ |
| Ground protection |
√ |
| Over-temp protection |
√ |
| Double Isolation |
√ |
| Auto Test |
√ |
| Earth Connection Test |
√ |
| Anti-tamper alarming |
√ |
OCPP1.6 Platform and App Specifications
| OCPP1.6 Protocol Management Platform |
√ |
| Sub-management Accounts for Operators |
√ |
| Customized LOGO and Advertisement on Platform |
√ |
| Ios & Android App System |
√ |
| Unlimited Function to Divided into sub-App system |
√ |
| App Management Web Accounts for Operators |
√ |
| Independent App system (Customized LOGO and advertisement) |
√ |
| Ethernet/RJ45 Connection Interface as standard |
√ |
| Wifi Connectivity as standard |
√ |
| RFID functionality for off-line as standard |
√ |
| Smart charge App Monitoring |
√ |
| Default Off-peak Charge App Monitoring |
√ |
| Random Delay App Monitoring |
√ |
| Respond of DSR Service App Monitoring |
√ |
| Total Power App Monitoring |
√ |
| Home Load Balancing App Monitoring |
√ |
| Residential Solar Power App Monitoring |
Optional |
| Residential Battery Bank App Monitoring |
Optional |
| Residential Air Source Heating App Monitoring |
Optional |
| Other Home Smart Devices App Monitoring |
Optional |
| Payment by credit cards |
Optional |
| Payment by RFID cards |
Optional |
| Solar+Battery+Smart Charge All- In- One |
Optional |
Regulations and Standard
| BS EN IEC 61851-1:2019 |
Electric vehicle conductive charging system. General requirements |
| BS EN 61851-22:2002 |
Electric vehicle conductive charging system. A.C. electric vehicle charging station |
| BS EN 62196-1:2014 |
Plugs, socket-outlets, vehicle connectors and vehicle inlets. Conductive charging of electric vehicles. General requirements |
| Applicable Regulations |
Electromagnetic Compatibility Regulations 2016 |
| Electrical Equipment Safety Regulations 2016 |
| Regulations: restriction of hazardous substances (RoHS) |
| Radio Equipment Regulations 2017 |
| BS 8300:2009+A1:2010 |
Design of an accessible and inclusive built environment. Buildings. Code of practice |
| BSI PAS1878 & 1879 2021 |
Energy Smart Appliances – System functionality and architecture & Demand side response operation |
| Electro magnetic compatibility directive 2014/30/EU |
| Low voltage directive 2014/35/EU |
| EMC Compliance: EN61000-6-3:2007+A1:2011 |
| ESD Compliance : IEC 60950 |
| Installation |
| BS 7671 |
Wiring Regulations 18th edition+2020EV Amendment |